二氧化碳记录器
二氧化碳记录器 CO2 Tand D TR-76Ui TR-76Ui-H
二氧化碳记录器 CO2 Tand D TR-76Ui TR-76Ui-H
商品型号: TR-76Ui
“二氧化碳记录仪TR - 76Ui”是三通道设计,同时测量和记录二氧化碳的浓度,温度和湿度数据记录仪。大气压力测量位置设置确保了更加稳定和准确的二氧化碳测量。提供的软件使用户能够下载数据到PC通过USB连接,使数据从所有三个通道可以同时观看图形或表格形式记录TR-76Ui。
该产品是一个全功能于一身的记录器, 包括数据记录器单元,传感器和软件。我们提供您所需的测量范围和精度的需求而定,不同的温度/湿度传感器两种类型的包。
通过使用数据收集器TR-57DCi(单独出售),这将有可能收集从TR-76Ui记录的数据通过红外通讯,并立即检查现场收集到的数据。上的TR57DCi支持TR-76Ui计划在2012年5月底发布。
这种多用途的数据记录仪可以在广泛的应用范围从个人到商业用途;为家居环境的测量,办事处和其他建筑物,二氧化碳测量和/或节能措施,如通风和空调controls.page的topCommunication接口上的TR-57DCi* TR-76Ui支持计划发布在年底二月2012.TR-57DCi
Overview
Product Type
Measurement Items
mmunication Interfaces
* TR-76Ui support on the TR-57DCi is planned for release at the end of February 2012.
测量和记录CO2,温度和湿度与一个TR-76Ui UnitTR76Ui是三通道设计,同时测量和记录二氧化碳的浓度,温度和湿度数据记录仪。它是能够测量二氧化碳浓度高达到5000 ppm.Reference 参考数据:关于二氧化碳浓度和可能产生的影响*本机器不是设计用于预防健康问题上。
TR-76Ui is a three-channel data logger designed to simultaneously measure and record CO2 concentration, temperature and humidity. It is capable of measuring CO2 concentrations up to 5,000 ppm.
Reference Data: About CO2 Levels and their Possible Effects
*This unit is not designed for use in preventing health problems.
温度/湿度传感器选择
TR-76Ui标准封装上包括我们上THA-3001温度/湿度传感器,TR-76Ui-H的高精度包包括HHA-3151温度/湿度传感器。页面顶部上同时查看一个简单的阅读图中上三个测量项目。 TR-76Ui单位下载记录的数据在的多尺度上图示图表或列表的形式,以及打印出来,可同时观看三个项目,二氧化碳浓度,温度和湿度,数据读取。从图形窗口,也是可以计算并查看最高,最低及平均所需的范围内(时间)上读数。
从图形窗口,也是可以计算并查看最高,最低及平均所需的范围内(时间)上读数。
大记录容量:8000数据设置一个数据集上包括所有三个通道:二氧化碳浓度,温度和湿度读数。有15上记录间隔(1秒至60分钟)来选择。在60分钟上最长录音时间上,可以继续录制连续一年。大气压力校正功能。此功能使TR-76Ui软件计算在测量位置上海拔上上大气压力。通过使用一个校正因子在测量位置上大气压力,更可靠上的二氧化碳浓度测量可以实现的。
查看液晶的二氧化碳浓度,温度,湿度测量所有三个通道上大型易于阅读上液晶屏上显示上电流读数。虽然总是被显示,CO2测量温度和湿度上显示模式可以选择从两个或固定显示任一交替显示
CO2 concentration, temperature, and humidity measurements are shown on the large easy-to-read LCD screen.
*与普通上电子数据表软件管理记录的数据通过多尺度图示,从TR-76Ui下载上数据可以被保存转成文字格式上与常见的电子表格软件上使用。
Manage Recorded Data with Common Spreadsheet Software
By using the Multi-Scale Graph, data downloaded from the TR-76Ui can be saved into text format for use with common spreadsheet software.
Transmit Recorded Data to PC via USB Connection
It is possible to connect a TR-76Ui unit directly to your computer with a USB cable.
Moreover, it is possible to gather current readings from the TR-76Ui connected to your computer and view those readings in the computer display.
发送记录的数据通过USB连接到PC。这是可能的TR-76Ui机器直接与USB电缆连接到您的计算机。
此外,它可以收集从TR-76Ui当前读数连接到您的计算机和查看计算机显示器的读数。*
有必要使用我们上数据采集器TR-57DCi(单独出售)(TR-57DCi)简单的数据采集现场:没有电脑,它有可能当场记录的数据收集和检查*支持TR-76Ui的TR-。57DCi计划在2012年2月底发布。
Easy Data Collection on the Spot: No Computer Necessary (TR-57DCi)
By using our Data Collector TR-57DCi (sold separately), it is possible to gather and check recorded data on the spot.
*Warning Function with Output Contact
When a set upper or lower limit has been exceeded, it is possible to use the provided output contact on the unit to issue a warning. This function can be used in conjunction with external devices such as a ventilation device.
* 输出接点与警告功能
当量测时已超出上限或下限设定,这是可能的上使用单位提供上输出接点发出警告。此功能可用于与外部设备上如通风设备。
* To connect to an external device, please use a JST Connector PAP-04V-S.
连接到外部设备,请使用JST连接器PAP-04V-S的。
商品规格:
产品TR-76Ui TR-76Ui - H
温度/湿度传感器(外部)大三阳临屋-3001-3151(高精密型)
热敏聚合物电阻铂电阻静电电容
测量通道1路温度湿度1路1路温度湿度1CH
单位测量°C,°F%的RH°C间,华氏度%相对湿度
测量范围0至55°C 10到95%相对湿度-30到80°C 0至99%RH
(注:TR-76Ui本身的运行环境是0到45°C,相对湿度90%或以下)
精度±0.5°C±5%RH(在25°C,50%RH)±0.3℃(在10至40°C间)
±0.5℃(在所有其他的温度)±2.5%RH(在25°C间,10%到85%RH)±4.0%RH(在25℃,0至10%或85%至99%RH)
在温度超过25°C,≥0°C间,加上±0.1%RH%来自25个不同程度。
湿度迟滞:±1.5%RH或更低(* 1)
测量分辨率0.1°C间1%RH 0.1°C间0.1%RH
响应时间(90%)约。 7分钟。约。 7分钟。约。 20秒。
二氧化碳传感器(内部)NDIR
测量通道二氧化碳浓度1CH
测量PPM单位
测量范围0至9,999 ppm的
精度±(读数的百万分之50 + 5%)(* 2)(5,000 ppm或以下)
1 ppm的测量分辨率最低
响应时间(90%)约。 15分钟。
记录容量8000组数据(一个数据集的二氧化碳浓度,温度和湿度的测量读数。)
选择15个选择:1,2,5,10,15,20,30秒拍摄间隔。或1,2,5,10,15,20,30,60分钟。
无尽的录音模式(复盖旧的数据容量已满时)或时间(容量已满时停止录音)
液晶显示项目的测量,电池电量等。
- 测量:CO2浓度,温度或湿度(固定或交替显示)
通讯接口USB通信,串行通信(RS-232C)(* 3),红外通信(IrPHY 1.2低功耗)(* 4)
通讯时间,下载时间为一个单位,在满负荷
- 通过USB通讯:约。 45秒。
- 通过红外通讯:约。 60至80秒。
外部报警端子输出端子:漏极开路输出(电压OFF时:直流小于30V /电流ON时:小于0.1A /电阻时:约15Ω)
电源AC适配器(AD-0638 AD-0638-C的),AA碱性电池(LR6)×4
电池寿命约。 2天(不含AC适配器电池)(5)
尺寸:高96毫米×宽66毫米x深46毫米(不包括突起部和传感器)
重量214克(包括电池,不包括传感器)
工作环境温度:0〜45°C,湿度:90%RH以下(无冷凝)
附件AA碱性电池(LR6)×4,AC适配器(AD-0638 AD-0638-C的),USB通讯电缆(美-15C),温度/湿度传感器(泰国-3001或Hha-3151),软件(CD -ROM),用户手册集(包括保修)
* 1:当环境中的温度和湿度超过50的值是°C间的75%,60℃50%,70°C间35%和80°C间25%,传感器的滞后可能波动值大于± 1.5%RH。在某些情况下,它可能需要一些时间才能恢复到正常的测量能力。
* 2:规定值是CO2传感器自动校准正常运行时的测量精度。在大气压力的变化直接影响二氧化碳的阅读,这可能会导致测量误差;在10hPa结果在1.6%,相对减少了二氧化碳的压力的下降。在这种情况下,我们建议开展“大气压力校正”功能在Windows二氧化碳录像机。
* 3:客户希望自己写的软件,请联系您当地经销商的串行通信协议规范。 (注:可选的串行通信电缆TR-07C还需要)
* 4:如果你想使用红外线通信下载记录数据,这是需要购买的数据收集器TR-57DCi(单独出售)。
* 5:电池寿命取决于使用它的环境温度,记录间隔,沟通的频率,和电池的性能变化。所有的估计是基于一个新的电池进行操作,并在没有办法保证实际的电池寿命。如果单元逆变器型荧光灯照明下使用,电池寿命可能会缩短
商品特点:
选购项目:
Standard Kit
- TR-76Ui

- Manuals

- AAA Alkaline Battery x 4

- AC Adaptor (AD-0638) or

- AC Adaptor (AD-0638-C)

- USB Communication Cable (US-15C)

- Software
CD-ROM 
- Temperature/Humidity Sensor (THA-3001/HHA-3151)

Setup
Optional Sensors for TR-76Ui
THA-3001 (Temperature/Humidity Sensor)
| Measurement Items |
Temperature |
Humidity |
| Measurement Range (*1) |
0 to 55 °C |
10 to 95 %RH |
| Measurement Resolution |
0.1 °C |
1 %RH |
| Measurement Accuracy |
±0.5 °C |
±5 % (at 25 °C, 50 %RH) |
| Response Time (90%) |
About 7 min. |
| Humidity Hysteresis |
- |
±1 %RH (30 to 90 %RH) |
| Operating Environment |
Temperature: 0 to 55 °C Humidity: 95 %RH or less (no condensation) |
| Sensor Dimensions |
H 18 mm x W 51.5 mm x D 10mm |
| Conditions for Use |
Do not expose to condensation, dampness, corrosive gases or organic solvents. |
| *1: Operating environment of the TR-76Ui itself is 0 to 45 °C, 90 %RH or less. |
Materials: ①Temp/Humidity Sensor ②Polypropylene Resin
Unit: mm
THA-3151 (Temperature/Humidity Sensor)
| Measurement Items |
Temperature |
Humidity |
| Measurement Range (*1) |
0 to 55 °C |
10 to 95 %RH |
| Measurement Resolution |
0.1°C |
1%RH |
| Measurement Accuracy |
±0.5 °C |
±5 % (at 25 °C, 50 %RH) |
| Response Time (90%) |
About 7 min. |
| Humidity Hysteresis |
- |
±1 %RH (30 to 90 %RH) |
| Operating Environment |
Temperature: 0 to 55 °C Humidity: 95 %RH or less (no condensation) |
| Sensor Dimensions |
H 18 mm x W 51.5 mm x D 10mm |
| Cable Length |
1.5 meters |
| Conditions for Use |
Do not expose to condensation, dampness, corrosive gases or organic solvents. |
| *1: Operating environment of the TR-76Ui itself is 0 to 45 °C, 90 %RH or less. |
Materials:①Temp/Humidity Sensor ②Polypropylene Resin ③Vinyl Chloride Coated Electrical Wire
Unit: mm
HHA-3151 (Temperature/Humidity Sensor-High-Precision Type)
| Measurement Items |
Temperature |
Humidity |
| Measurement Range (*1) |
-30 to 80°C |
0 to 99%RH |
| Measurement Resolution |
0.1°C |
0.1 %RH |
| Measurement Accuracy |
±0.3°C (at 10 to 40 °C) ±0.5°C (at all other temperatures) |
±2.5 %RH(at 25 °C, 10 to 85 %RH) ±4.0 %RH(at 25 °C, 0 to 10 % or 85 to 99 %RH) At temperatures other than 25 °C and ≥ 0 °C, add ±0.1 %RH per degree of difference from 25. |
| Response Time (90%) |
Approx. 7 min. |
Approx. 20 sec. |
| Sensor Temperature Durability |
-30 to 80°C |
| Long Term Stability |
±1%RH/yr, ±0.1°C/yr |
| Humidity Hysteresis |
- |
1.5%RH or lower (*2) |
| Sensor Dimensions |
H 19 mm x W 65 mm x D 10 mm |
| Cable Length |
1.5 meters |
| Conditions for Use |
Do not expose to condensation, dampness, corrosive gases or organic solvents |
*1: Operating environment of the TR-76Ui itself is 0 to 45 °C, 90 %RH or less. *2: When used at temperatures equal to or higher than 0°C. |
Materials: ①Polycarbonate ②Vinyl chloride-shielded wire
Unit: mm
Communication Cables for TR-76Ui
TR-07C
Serial Communication Cable
Cable Length: 1.5 meters
Connector Type: Specialized Connector D-sub9pin
For communication with computer
*Customers wishing to write their own software, please contact your local distributor for the serial communications protocol specifications.
Unit: mm
TR-1C30
Sensor Extension Cable
Cable Length: 3 meters
*Up to 3 cables can be connected to one sensor (THA3001/THA-3151/HHA-3151).
Materials:①Vinyl Coated Electrical Wire
Unit: mm
US-15C
USB Communication Cable
Cable Length: 1.5 meters
Unit: mm
AC Adaptor
AD-0638
Cable length: 1.8 meters
Input:AC100-240V
Output:DC6V 500mA
Frequency:50/60Hz
Plug Type: A
Unit: mm
AD-0638-C
Cable length: 1.8 meters
Input:AC100-240V
Output:DC6V 500mA
Frequency:50/60Hz
Plug Type: C
Unit: mm
Wall Attachment
AT-76K1
Materials: Aluminum
Accessories: Fixation screw (M4) x 2
Dimensions: W68.8 x H60 x D50.7mm
Unit
查看完整表格
| Product | TR-76Ui | TR-76Ui-H |
| Temperature/Humidity Sensor (External) |
THA-3001 |
HHA-3151(High-Precision Type) |
| Thermistor |
Polymer Resistance |
Platinum Resistance |
Electrostatic Capacitance |
| Measurement Channels |
Temperature 1ch |
Humidity 1ch |
Temperature 1ch |
Humidity 1ch |
| Units of Measurement |
°C, °F |
%RH |
°C, °F |
%RH |
| Measurement Range |
0 to 55°C |
10 to 95%RH |
-30 to 80°C |
0 to 99%RH |
| (Note: Operating environment of the TR-76Ui itself is 0 to 45 °C, 90 %RH or less) |
| Accuracy |
±0.5°C |
±5%RH (at 25°C, 50%RH) |
±0.3°C (at 10 to 40°C) ±0.5°C (at all other temperatures) |
±2.5%RH (at 25°C, 10 to 85%RH) ±4.0%RH (at 25°C, 0 to 10% or 85 to 99%RH) At temperatures other than 25°C and ≥ 0°C, add ±0.1%RH per degree of difference from 25. Humidity Hysteresis: ±1.5%RH or lower (*1) |
| Measurement Resolution |
0.1 °C |
1 %RH |
0.1 °C |
0.1 %RH |
| Response Time (90%) |
Approx. 7 min. |
Approx. 7 min. |
Approx. 20 sec. |
| |
| CO2 Sensor (Internal) |
NDIR |
| Measurement Channels |
CO2 Concentration 1ch |
| Units of Measurement |
ppm |
| Measurement Range |
0 to 9,999 ppm |
| Accuracy |
±(50 ppm + 5 % of reading) (*2) (at 5,000 ppm or less) |
| Measurement Resolution |
Minimum of 1 ppm |
| Response Time (90%) |
Approx. 15 min. |
| |
| Logging Capacity |
8,000 data sets (One data set consists of readings for CO2 concentration, Temperature and Humidity measurements.) |
| Recording Interval |
Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min. |
| Recording Mode |
Endless (Overwrite oldest data when capacity is full) or One Time (Stop recording when capacity is full) |
| LCD Display Items |
Measurements, Battery Level, etc. - Measurements: CO2 concentration, Temperature or Humidity (fixed or alternating display) |
| Communication Interfaces |
USB Communication, Serial Communication (RS-232C) (*3), Infrared Communication (IrPHY 1.2 low power) (*4) |
| Communication Time |
Downloading time for one unit at full capacity - Via USB communication: approx. 45 sec. - Via infrared communication: approx. 60 to 80 sec. |
| External Alarm Terminal |
Output Terminal: Open Drain Output (Voltage when OFF: DC less than 30V / Current when ON: less than 0.1A / Resistance when ON: about 15Ω) |
| Power |
AC Adaptor (AD-0638 or AD-0638-C), AA Alkaline Battery (LR6) x 4 |
| Battery Life |
Approx. 2 days (batteries only without AC adaptor) (*5) |
| Dimensions |
H 96 mm x W 66 mm x D 46 mm (excluding protrusions and sensor) |
| Weight |
214 g (including batteries, excluding sensor) |
| Operating Environment |
Temperature: 0 to 45 °C, Humidity: 90 %RH or less (no condensation) |
| Accessories |
AA alkaline battery (LR6) x 4, AC Adaptor (AD-0638 or AD-0638-C), USB Communication Cable (US-15C), Temperature/Humidity Sensor (THA-3001 or HHA-3151), Software (CD-ROM), User's Manual Set (Warranty Included) |
- *1: When used in environments where temperature and humidity are over the values of 50°C 75%, 60°C 50%, 70°C 35%, and 80°C 25%, sensor hysteresis may fluctuate by values greater than ±1.5%RH. Under certain circumstances, it may take some time to return to normal measurement capability.
- *2: Stated value is the measurement accuracy of the CO2 sensor when Auto Calibration is operating properly. A change in atmospheric pressure directly influences the reading of CO2, which can cause measurement errors; a decrease in pressure by 10hPa results in a relative decrease in CO2 by 1.6%. In such a case, we recommend carrying out the "Atmospheric Pressure Correction" function found in CO2 Recorder for Windows.
- *3: Customers wishing to write their own software, please contact your local distributor for the serial communications protocol specifications. (Note: Optional serial communication cable TR-07C is also required.)
- *4: If you wish to use infrared communication to download recorded data, it is necessary to purchase the Data Collector TR-57DCi (sold separately).
- *5: Battery life varies depending upon the ambient temperature in which it is used, the recording interval, the frequency of communication, and the battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life. Battery life may be shortened if the unit is used under inverter type fluorescent lighting.
|
|