2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display(GDS-1022, 1042, 1062, 1102)

Home> Products>2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display

Product

2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display

GDS-1102,100MHz, 2-Channel 100MHz, 2-Channel Lightweight Di

GDS-1022 , 25MHz, 2-Channel Digital Storage Oscilloscope wi

Product ID: GDS-1022, 1042, 1062, 1102

100MHz, 2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display

FEATURES
100 MHz Bandwidth
2 Input Channels
250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
4k Memory Length per Channel
Peak Detect as Fast as 10ns
Save/Recall of 15 Front Panel Settings & Waveforms
5.6" TFT Color Display
19 Auto Measurements
Timebase Range: 1nS ~ 10nS/div
USB Port for PC Connection
Math Operators - Add, Subtract, FFT
6-Digit Real-Time Frequency Counter

Selection Guide:
GDS-1022 25MHz, 2-Channel Lightweight Digital Storage Oscilloscope
GDS-1042 40MHz, 2-Channel Lightweight Digital Storage Oscilloscope
GDS-1102 100MHz, 2-Channel Lightweight Digital Storage Oscillosocpe
GDS-1062 60MHz, 2-Channel Lightweight Digital Storage Oscilloscope

Specifications:

GDS-1102
- SPECIFICATIONS
- VERTICAL
- Channels 2
- Bandwidth DC ~ 100MHz (-3dB)
- Rise Time <3.5ns Approx.
- Sensitivity 2mV/div ~ 5V/div (1-2-5 increments)
- Accuracy
- ±(3% x |Readout|+0.1 div + 1mV)
- Input Coupling AC, DC & Ground
- Input Impedance
- 1M±2%, ~16pF
- Polarity Normal & Invert
- Maximum Input
- 300V (DC+AC peak), CATII
- Waveform Signal Process + , - , FFT
- Offset Range
- 2mV/div ~ 50mV/div : ±0.4V
- 100mV/div ~ 500mV/div : ±4V
- 1V/div ~ 5V/div : ±40V
- Bandwidth Limit 20MHz (-3dB)
- TRIGGER
- Sources CH1 , CH2 , Line , EXT
- Modes
- Auto, Normal, Single, TV, Edge, Pulse Width
- Coupling AC , DC , LF rej. , HF rej. , Noise rej.
- Sensitivity DC ~ 25MHz : Approx. 0.5div or 5mV
- 25MHz ~ 100MHz: Approx. 1.5div or 15mV
- EXT TRIGGER
- Range ±15V
- Sensitivity DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV
- Input Impedance 1MΩ±2% , ~ 16pF
- Maximum Input 300V (DC AC peak) , CATII
- HORIZONTAL
- Range 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div
- Modes Main, Window, Window Zoom, Roll, X-Y
- Accuracy ±0.01%
- Pre-Trigger 10 div maximum
- Post-Trigger 1000 div
- X-Y MODE
- X-Axis Input Channel 1
- Y-Axis Input
- Channel 2
- Phase Shift ±3° at 100kHz
- SIGNAL ACQUISITION
- Real-Time Sample Rate 250MSa/s maximum
- Equivalent Sample Rate 25GSa/s maximum
- Vertical Resolution 8 Bits
- Record Length 4K Dots maximum
- Acquisition Mode
- Normal, Peak Detect, Average
- Peak Detection
- 10ns (500ns/div ~ 10s/div)
- Average
- 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
- CURSORS AND MEASUREMENT
- Voltage Measurement Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot
- Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
- Cursors Measurement Voltage difference between cursors (ΔV)
- Time difference between cursors (ΔT)
- Auto Counter
- Resolution : 6 digits
- Accuracy : ±2%
- Signal Source: All available trigger source except the Video trigger mode
- CONTROL PANEL FUNCTION
- Autoset Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level
- Save Setup Up to 15 sets of measurement conditions
- Save Waveform
- 15 sets of waveform
- DISPLAY
- TFT LCD Type 5.6 inch
- Display Resolution
- 234 (Vertically) x 320 (Horizontally) Dots
- Display Graticule
- 8 x 10 divisions
- Display Brightness
- Adjustable
- INTERFACE
- USB Slave Connector USB1.1 & 2.0 full speed compatible (printers and flash disk not supported)
- SD Card Slot Image (BMP), waveform data (CSV), and setup (SET)
- POWER SOURCE
- Line Voltage Range
- AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
- MISCELLANEOUS
- Multi-Language Menu Available
- Online Help Available
- ACCESSORIES
- User manual x 1
- Power Cord x 1
- GTP-100A Probe(10:1/1:1) x 2
- DIMENSIONS &WEIGHT
- 310(W) x 142(H) x 140(D)mm
- Approx. 2.5kg
- OPTION
- Inquiry Model Name Descripation
- GDB-02 Oscilloscope Education and Training Kit For GDS-800 Series, GDS-1000 Series, GDS-2000 Series
- GTL-242 USB Cable For: GDB-02, GDS-800 Series, GDS-1000 Series, GDS-2000 Series, GPD-3303S
- GTP-100A Probe 10:1 DC~100MHz, 1:1 DC~6MHz For GDS-810C/810S/1102/2102/2104, GOS-6103/6103C/6112
- GTL-110 BNC Cable BNC Female - BNC Female For GDS Series, GFC-8131H/8270H, GOS Series, GRG-450B, GRS-6052A/6032A, GSG-120/122, SFG-830

Certificate:

Contact Detail