2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display ( GDS-1022, 1042, 1062, 1102)

Specifications:

---

• GDS-1102
  • SPECIFICATIONS
  • VERTICAL
  • Channels 2
  • Bandwidth DC ~ 100MHz (-3dB)
  • Rise Time <3.5ns Approx.
  • Sensitivity 2mV/div ~ 5V/div (1-2-5 increments)
  • Accuracy
  • ±(3% x |Readout|+0.1 div + 1mV)
  • Input Coupling AC, DC & Ground
  • Input Impedance
  • 1M±2%, ~16pF
  • Polarity Normal & Invert
  • Maximum Input
  • 300V (DC+AC peak), CATII
  • Waveform Signal Process + , - , FFT
  • Offset Range
  • 2mV/div ~ 50mV/div : ±0.4V
  • 100mV/div ~ 500mV/div : ±4V
  • 1V/div ~ 5V/div : ±40V
  • Bandwidth Limit 20MHz (-3dB)
  • TRIGGER
  • Sources CH1 , CH2 , Line , EXT
  • Modes
  • Auto, Normal, Single, TV, Edge, Pulse Width
  • Coupling AC , DC , LF rej. , HF rej. , Noise rej.
  • Sensitivity DC ~ 25MHz : Approx. 0.5div or 5mV
  • 25MHz ~ 100MHz: Approx. 1.5div or 15mV
  • EXT TRIGGER
  • Range ±15V
  • Sensitivity DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV
  • Input Impedance 1MΩ±2% , ~ 16pF
  • Maximum Input 300V (DC AC peak) , CATII
  • HORIZONTAL
  • Range 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div
  • Modes Main, Window, Window Zoom, Roll, X-Y
  • Accuracy ±0.01%
  • Pre-Trigger 10 div maximum
  • Post-Trigger 1000 div
  • X-Y MODE
  • X-Axis Input Channel 1
  • Y-Axis Input
  • Channel 2
  • Phase Shift ±3° at 100kHz
  • SIGNAL ACQUISITION
  • Real-Time Sample Rate 250MSa/s maximum
  • Equivalent Sample Rate 25GSa/s maximum
  • Vertical Resolution 8 Bits
  • Record Length 4K Dots maximum
  • Acquisition Mode
  • Normal, Peak Detect, Average
  • Peak Detection
  • 10ns (500ns/div ~ 10s/div)
  • Average
  • 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
  • CURSORS AND MEASUREMENT
  • Voltage Measurement Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot
  • Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
  • Cursors Measurement Voltage difference between cursors (ΔV)
  • Time difference between cursors (ΔT)
  • Auto Counter
  • Resolution : 6 digits
  • Accuracy : ±2%
  • Signal Source: All available trigger source except the Video trigger mode
  • CONTROL PANEL FUNCTION
  • Autoset Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level
  • Save Setup Up to 15 sets of measurement conditions
  • Save Waveform
  • 15 sets of waveform
  • DISPLAY
  • TFT LCD Type 5.6 inch
  • Display Resolution
  • 234 (Vertically) x 320 (Horizontally) Dots
  • Display Graticule
  • 8 x 10 divisions
  • Display Brightness
  • Adjustable
  • INTERFACE
  • USB Slave Connector USB1.1 & 2.0 full speed compatible (printers and flash disk not supported)
  • SD Card Slot Image (BMP), waveform data (CSV), and setup (SET)
  • POWER SOURCE
  • Line Voltage Range
  • AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
  • MISCELLANEOUS
  • Multi-Language Menu Available
  • Online Help Available
  • ACCESSORIES
  • User manual x 1
  • Power Cord x 1
  • GTP-100A Probe(10:1/1:1) x 2
  • DIMENSIONS &WEIGHT
  • 310(W) x 142(H) x 140(D)mm
  • Approx. 2.5kg
  • OPTION
  • Inquiry Model Name Descripation
  • GDB-02 Oscilloscope Education and Training Kit For GDS-800 Series, GDS-1000 Series, GDS-2000 Series
  • GTL-242 USB Cable For: GDB-02, GDS-800 Series, GDS-1000 Series, GDS-2000 Series, GPD-3303S
  • GTP-100A Probe 10:1 DC~100MHz, 1:1 DC~6MHz For GDS-810C/810S/1102/2102/2104, GOS-6103/6103C/6112
  • GTL-110 BNC Cable BNC Female - BNC Female For GDS Series, GFC-8131H/8270H, GOS Series, GRG-450B, GRS-6052A/6032A, GSG-120/122, SFG-830